How to use the Jobe triple action pump

2 mars 2020

The Jobe triple-action SUP pump is designed to inflate SUPs to pressures up to 21 PSI fast and easy! It features a double 3.5 liter action cylinders, a pressure gauge to keep control and a Halkey Roberts nozzle to fit all Jobe Inflatable boards on the market. The Jobe triple-action SUP pump has three different operating modes to keep inflation easy at any stage. Below you can find a description of how you use the Jobe triple-action SUP Pump.

Step 1: Connect Hose

To start, you connect the hose to the pump and on the other end at the SUP. Make sure that the valve on your SUP is closed.

Step 2: Inflate the SUP (part 1)
Switch the Action Control level of the pump to 1 and start pumping until it gets too heavy.

Step 3: Inflate the SUP (part 2)
When pumping on setting 1 is too heavy, you can switch to the next setting. In setting 2, you can inflate your SUP and again, pump until it’s getting too heavy.

Step 4: Inflate the SUP (part 3)
Switch to setting 3 and inflate the SUP to the maximum of 21 psi. Pump until you have reached your preferred psi by checking the meter on top of the pump.

Step 5: Disconnecting
When your preferred psi is reached, disconnect the hose from the valve and close the valve back down.

That’s all! Take a look at the video below to see how it’s done.